The purpose of the car body polishing process is to protectthe varnish coating from the effects of aggressive factors that are rich in the environment. One of the accompanying favorable effects is restoring the original paintwork, which gives a positive visual impact and aesthetic satisfaction.
First
of all, professionals remove the thin top layer of the varnish. After that,
they apply high shine car wax
to the surface. It will give your car a great shine and protect its body from
oxidation.
● First Stage
In this stage, professionals prepare the car for polishing. So, they wash it properly to repel dust, dirt, and grains of sand left. Then, the vehicle is left to dry. They use white spirit to clean off the surface traces of tar that could not be washed with water. In some cases, abrasive clay is also used to achieve better results.
● Second Stage
Polishing begins with a "rough" paste. Professionals apply high shine car wax to the car surface. They make sure that polishing should not exceed the area of a square of 40 by 40 centimeters. Otherwise, the paste begins to dry out before it is used. They start working with an abrasive-free paste. They remove the rough circle from the machine and put a process designed for soft polishing.
● Third Stage
Now, using a cloth, apply an abrasive-free polishing paste, and rub it on the surface in a circular motion. Do not allow clots of paste on the surface; if clots form, rub them. Wait a few minutes for the paste to dry out and turn white, then you can turn on the machine, set the average speed, and polish this paste. In the end, professionals add a finishing touch to make the car look like a new one.
Don’t forget to treat your car with Long-Lasting
Car Polish. It eliminates all visible and non-visible defects, adds a
protective layer to the car’s exterior body, and protects it from various
damaging elements.
0 Comments